HomeMy WebLinkAbout2017-11-20-addendum-3-technical-design-guidelinesGENERAL NOTE:
1. Upate all dates in footers to read:
11/20/2017
Table of Contents
1. Added Appendix D - BIM Standards
2. Added Appendix E - CAD Standards
Division 01
1. Page 25, Section 1.11, A, delete items 1 -6 replace with the following:
1. Refer to Appendix E
2. Page 25, Section 1.11, B, delete items 1 -6 replace with the following:
1. Refer to Appendix D
Division 08
1. Page 70, Section 1.10, I, 1, f, 2), revise as follows:
2) Electric Power Transfer (EPT) at electrical openings or electrified hinges.
i. Von Duprin VDEPT-10C.
ii. Bommer Electrified Hinge
iii. As approved by TCCD
2. Page 73, Section 1.10, I, 6, b, 5), revise as follows:
5) Power Supplies PS906-9002Q (six-zone).
3. Page 73, Section 1.10, I, 6, b, 5), revise as follows:
7) Power Transfer EPT-10C.
4. Page 74, Section 1.10, I, 6, d, 3), revise as follows:
3) Power supplies shall be connected to a UPS system in the IDF closet.
5. Page 74, after Section 1.10, I, 6, d, 3), add as follows:
4) Power supplies shall be mounted to a 4x8 sheet of painted (white fireproof) plywood.
6. Page 77, after Section 1.10, I, 15, a, 1), i, revise as follows:
i. 1006 series or 8500 series at interior locations (Only as Directed by TCCD Access
Control Department)
7. Page 80, after Section 1.10, M, 1, revise as follows:
1. FOR ASSISTANCE IN PREPARING A HARDWARE SCHEDULE CONTACT:
Tarrant County College Access Control
OFFICE 817-515-1960
CELL 817–515-1963
Appendix C - Section 28 13 00
1. Page 27, Part 1, Section 1.07, C, revise as follows:
C. Installer Qualifications: Company specializing in installing the products specified in this section
with minimum three years documented experience and MUST be a Lenel Value Added Reseller
(VAR).
2. Page 29, Part 2, Section 2.01, A, 1, revise as follows:
1. Lenel / Facility Commander WinX.
3. Page 29, Part 2, Section 2.02, A, 1, revise as follows:
1. Product: GE ACUXL16- XL or XL Plus
4. Page 29, Part 2, Section 2.02, C, 1 revise as follows:
1. Product: Lenel RRE04-E1L Remote Reader Electronics Modules.
Addendum No. 3
TECHNICAL DESIGN GUIDELINES 11/20/17
Appendix D
1. Immediately following Appendix C add pages 1-157 from the TCCD BIM Standards_4.20.16v1
document.
Appendix E
1. Immediately following Appendix D add pages 1-50 from the TCCD CAD Standards Part 1
document and Pages 1-57 from the TCCD CAD Standards Part 2 document.
END OF ADDENDUM 3